[jLou711]

So I need to unscrew the screws which connects the LCD to the digitizer.. but the screws are SO tight and I cannot unscrew them, I have the correct phillips screwdriver but for some reason its so tight :/

any ideas on what to do?

[jLou711]

bump

[cleashy]

gym...

[jLou711]

If you're not going to give a legitimate reply, then don't bother. It just makes you sound like your pretending to be cool to get +rep LOL..

[JackE5]

(Original post by jLou711)
So I need to unscrew the screws which connects the LCD to the digitizer.. but the screws are SO tight and I cannot unscrew them, I have the correct phillips screwdriver but for some reason its so tight :/

any ideas on what to do?

Hi, one of the screws is usually really tight, probably the one of the far end. Try using a different screw driver. If all else fails, you can buy the lcd and the digitiser together, they're around £20 on ebay.

[jLou711]

(Original post by JackE5)
Hi, one of the screws is usually really tight, probably the one of the far end. Try using a different screw driver. If all else fails, you can buy the lcd and the digitiser together, they're around £20 on ebay.

Thanks going to return the digitizer I bought and buy the pre-assembled one.