The Student Room Group

AQA 7407/02 New spec Unofficial Mark schem

1) 1.7mm maybe 2.7mm
b)
highest emf was 1456 or something
value of alpha was 10
100000 was the highest voltage reading
unsuitable to use because its smallest measurement was 2000 but highest reading was 1456 so the resolution was not great enough and equipment not sensitive enough

4 resistors required
power 110W (114)
Order of area 1x10^-1 maybe just be 10^0


0.51mm was the diameter
1.65x10^11 I think was young modulus

moments was 0.73Nm

MCQ:
phase differene pi/4
diffraction grating one was D
velocity was 0 and speed 2.4m/s
the refraction one was optical density
antiproton was uud all with bars above
annihiliation was p + pbar => 2 gamma phorons



Any other questions you can remember or answers please post and I'll see if I can remember the answers
(edited 7 years ago)
Original post by Xenon17
1) 1.7mm
b)
highest emf was 1456 or something
value of alpha was 10
100000 was the highest voltage reading
unsuitable to use because its smallest measurement was 2000 but highest reading was 1456 so the resolution was not great enough and equipment not sensitive enough

4 resistors required
power 110W (114)
Order of area 1x10^-1 maybe just be 10^0


0.51mm was the diameter
1.65x10^11 I think was young modulus



MCQ:
phase differene pi/4
diffraction grating one was D
velocity was 0 and speed 2.4m/s
the refraction one was optical density
antiproton was uud all with bars above
annihiliation was p + pbar => 2 gamma phorons


Any other questions you can remember or answers please post and I'll see if I can remember the answers


What were the values used for the Young Modulus calculation?
Original post by Harryedwards8
What were the values used for the Young Modulus calculation?


Gradient
Reply 3
Original post by Xenon17
1) 1.7mm
b)
highest emf was 1456 or something
value of alpha was 10
100000 was the highest voltage reading
unsuitable to use because its smallest measurement was 2000 but highest reading was 1456 so the resolution was not great enough and equipment not sensitive enough

4 resistors required
power 110W (114)
Order of area 1x10^-1 maybe just be 10^0


0.51mm was the diameter
1.65x10^11 I think was young modulus



MCQ:
phase differene pi/4
diffraction grating one was D
velocity was 0 and speed 2.4m/s
the refraction one was optical density
antiproton was uud all with bars above
annihiliation was p + pbar => 2 gamma phorons


Any other questions you can remember or answers please post and I'll see if I can remember the answers


1 was 2.9.
Reply 4
Original post by marldor
1 was 2.9.


im pretty sure it was 2.7
Original post by marldor
1 was 2.9.


it definitely had no 9 in it it may be 2.7
for the moments question, am I right in thinking I had to multiply the weight of the ball by the 12cm PLUS half of the diameter of the ball (because the force acts downwards from the ball's COM)?
Reply 7
Original post by jacklfc99
for the moments question, am I right in thinking I had to multiply the weight of the ball by the 12cm PLUS half of the diameter of the ball (because the force acts downwards from the ball's COM)?


Yes should of got 0.73
Reply 8
Original post by Xenon17
it definitely had no 9 in it it may be 2.7


The zero line was past 2, and the 9 line was lined up with the other scale. And Im pretty sure you had to put 2.70 or 2.90 (something my teacher said)
Reply 9
Original post by Jack.dim
Yes should of got 0.73


Yeah, that question was irritating because it did not tell you it was a uniform sphere, or where the centre of mass acted.
Original post by Jack.dim
Yes should of got 0.73


phew, everyone was saying 0.6 frightened me fro a second
.bump
Does anyone have the unofficial mark scheme or all the questions from the paper? I desperately need it! I would be extremely grateful! Thank you so much!!!!
Original post by Xenon17
1) 1.7mm maybe 2.7mm
b)
highest emf was 1456 or something
value of alpha was 10
100000 was the highest voltage reading
unsuitable to use because its smallest measurement was 2000 but highest reading was 1456 so the resolution was not great enough and equipment not sensitive enough

4 resistors required
power 110W (114)
Order of area 1x10^-1 maybe just be 10^0


0.51mm was the diameter
1.65x10^11 I think was young modulus

moments was 0.73Nm

MCQ:
phase differene pi/4
diffraction grating one was D
velocity was 0 and speed 2.4m/s
the refraction one was optical density
antiproton was uud all with bars above
annihiliation was p + pbar => 2 gamma phorons



Any other questions you can remember or answers please post and I'll see if I can remember the answers




what did you write for the long question of seismometer?

Quick Reply