The Student Room Group
Uni students - Complete our survey >>
Uni students - Complete our survey >>
Uni students - Complete our survey >>

CyberStart Assess Q10-14

Any help would be appreciated aha

Scroll to see replies

Reply 1
Avatar for K.Wrne
K.Wrne
2
Original post by dingerdonger23
Any help would be appreciated aha


If you have figured 11 I can help with all.
:laugh: i'm still trying to figure out the first few...
Reply 3
Avatar for somacc
somacc
1
I've got all of them except 10 and 11. Anyone got hints for those two?
Original post by dingerdonger23
Any help would be appreciated aha

i can help with 13 and 14 but i need some help on 6
Reply 5
Avatar for filipw
filipw
16
Original post by vijval999
i can help with 13 and 14 but i need some help on 6

hint dont use 1 type "one"
turnCircle("one", degrees)
Original post by filipw
hint dont use 1 type "one"
turnCircle("one", degrees)

thanks but i managed to finish that. The only ones im stuck on now are 10 and 11
I will help with 12 if someone can help with 4. I know that it is weird but I can't for the life of me figure out 4!
Original post by ether0808
I will help with 12 if someone can help with 4. I know that it is weird but I can't for the life of me figure out 4!

find a spelling mistake in the html and correct it
Reply 9
Avatar for filipw
filipw
16
booooooooook
Original post by vijval999
find a spelling mistake in the html and correct it

for 12 read the programme over. By running it you know what check is incorrect, Look carefully at the for... line.
Heya guys, the codes were pretty easy to do, for a lot of them I just over looked and thought about it to hard rather than finding the simple bits. I have completed them all apart from 11 and 10. They are probably easy but I can't seem to find it. Any hints or pointers would be greatly appreciated.
hey guys, i'm stuck on 13. how did you'll solve it?
Original post by ether0808
for 12 read the programme over. By running it you know what check is incorrect, Look carefully at the for... line.

oh yeah i've already done 12 but do you have any suggestions on 10 or 11
Original post by Fatima3660
hey guys, i'm stuck on 13. how did you'll solve it?


I don't think I did it right however, what I did was;

went into the inspect element, clicked on the interface then target classes. I then changed the bit where it said "all 0.01s ease-in-out 1s" to the last 1s to 1000s. Then I clicked on the box (target) and It came up in green and told me the answer. If you know what to do for 10 and 11 that would be great to know.
Original post by Fatima3660
hey guys, i'm stuck on 13. how did you'll solve it?

you just need to change the time it takes to move to a different squeare from 0 seconds "0s" to something higher than 1 and click on the purple square
i've done all of them and would be willing to help
Original post by qq51204
i've done all of them and would be willing to help

Could you please help with four?
I have done up to 13 except number 4
Someone has replied beforehand but I am still confused, am I just overthinking it?

Quick Reply

Related discussions

Latest

Trending

Trending

Articles for you