Hey there! Sign in to join this conversationNew here? Join for free

The Physics PHYA2 thread! 5th June 2013 watch

  • View Poll Results: What mark do you think you got out of 70?
    0-20
    6
    3.00%
    21-40
    12
    6.00%
    41-50
    29
    14.50%
    51-60
    79
    39.50%
    61-70
    74
    37.00%

    Offline

    2
    ReputationRep:
    (Original post by usycool1)
    *or stationary
    Hey,

    Could you please answer my question above?
    Thanks


    Posted from TSR Mobile
    Offline

    5
    ReputationRep:
    (Original post by susanjan123)
    Thankyou xo


    Posted from TSR Mobile
    OMG!!! This paper(June 2009) is soooooo easy! I actually got 68 marks in this one when I usually get 64. But, the grade boundaries are also quiet high than usual. 56 for an A.
    Offline

    2
    ReputationRep:
    (Original post by StalkeR47)
    OMG!!! This paper(June 2009) is soooooo easy! I actually got 68 marks in this one when I usually get 64. But, the grade boundaries are also quiet high than usual. 56 for an A.
    Yeah june 2009 is soo easy got 66 is that

    Could you help me on 3e on the attached, could you please draw of what they are looking for?


    Posted from TSR Mobile
    Attached Images
     
    Offline

    0
    ReputationRep:
    (Original post by pilotluke1)
    Hi June 2012 4aii i got the right answer but by common sense where actually is that angle on the diagram? Also for bi how did they get 65?
    Yes, does anyone know, I don't know how they got 65 either? I did 85-30 to get 55 haha.
    Offline

    5
    ReputationRep:
    (Original post by Jimmy20002012)
    Yeah june 2009 is soo easy got 66 is that

    Could you help me on 3e on the attached, could you please draw of what they are looking for?


    Posted from TSR Mobile
    Hi, it is not very complicated. Just draw a plain board and in the board, draw close fringes with middle to be more dark and as you draw fringes away from the middle, their intensity reduces. Does that helps? (Label max and min).
    Offline

    5
    ReputationRep:
    (Original post by wallaby)
    Yes, does anyone know, I don't know how they got 65 either? I did 85-30 to get 55 haha.
    Q4aii right? Since the angle is 85 degrees to the left, it is also 85 degrees inside the ray that forms the triangle. (Note: The angle of reflection is always the same as angle of incident). So, to find i, you add 85 + 30 which gives 115 degrees. Since triangle is 180, 180 - 115 gives 65 degrees. Any more help? Ask me
    Offline

    5
    ReputationRep:
    (Original post by pilotluke1)
    Hi June 2012 4aii i got the right answer but by common sense where actually is that angle on the diagram? Also for bi how did they get 65?
    Q4aii right? Since the angle is 85 degrees to the left, it is also 85 degrees inside the ray that forms the triangle. (Note: The angle of reflection is always the same as angle of incident). So, to find i, you add 85 + 30 which gives 115 degrees. Since triangle is 180, 180 - 115 gives 65 degrees. Any more help? Ask me
    Offline

    2
    ReputationRep:
    (Original post by StalkeR47)
    Hi, it is not very complicated. Just draw a plain board and in the board, draw close fringes with middle to be more dark and as you draw fringes away from the middle, their intensity reduces. Does that helps? (Label max and min).
    Thanks that helped

    Finally with this question on 3aiv, I firstly used the equation of P=FV= 96106 x 58= 5574148W, I took that as the useful output power. So using the equation of efficiency= Useful Output Power/Input Power, so the input power= 5574148/0.20(the efficiency)= 2.8 x 10^6 W. however this is not the answer, why?? Thanks


    Posted from TSR Mobile
    Offline

    2
    ReputationRep:
    Here's the question, 3aiv


    Posted from TSR Mobile
    Attached Images
     
    Offline

    5
    ReputationRep:
    (Original post by Jimmy20002012)
    Here's the question, 3aiv


    Posted from TSR Mobile
    M8, which past paper is it? I have done that question so I will be able to explain better by looking at the question properly. Thanks.
    Offline

    2
    ReputationRep:
    (Original post by StalkeR47)
    M8, which past paper is it? I have done that question so I will be able to explain better by looking at the question properly. Thanks.
    I have just posted it above


    Posted from TSR Mobile
    Offline

    2
    ReputationRep:
    (Original post by StalkeR47)
    M8, which past paper is it? I have done that question so I will be able to explain better by looking at the question properly. Thanks.
    Worked it out yet


    Posted from TSR Mobile
    Offline

    5
    ReputationRep:
    (Original post by Jimmy20002012)
    Thanks that helped

    Finally with this question on 3aiv, I firstly used the equation of P=FV= 96106 x 58= 5574148W, I took that as the useful output power. So using the equation of efficiency= Useful Output Power/Input Power, so the input power= 5574148/0.20(the efficiency)= 2.8 x 10^6 W. however this is not the answer, why?? Thanks


    Posted from TSR Mobile
    Ok, First, equation is-----efficiency = output/input times 100%. Since the question tells you that 20% is the acceleration efficiency. so, (20% = 16.6ms-2). You are asked to calculate the average power input (total power input). So, find the 100% efficiency. 20%=16.6, 1%= 16.6/0.20 = 0.8358ms-2. So, 100% efficiency for the acceleration would be, 100% = 0.83.. times 100 = 83ms-2. The tension is the cable is 9.61x10^4N. so, P=fv can be used to calculate the output power. (v is not given), so use p=f times s/t. This gives, p = (9.61x10^4 x 101)/3.5 = 2.8Mw. Now, since this is only 20% of the total power input, You will have to find 100% because input power means total input power to the machine. So, the final answer would be(lets call 100% power to be x), 2.8/x = 100%. Rearrange, you will find x to be 14Mw. So, 100% input is 14Mw. Does that helps?
    Offline

    2
    ReputationRep:
    (Original post by StalkeR47)
    Ok, First, equation is-----efficiency = output/input times 100%. Since the question tells you that 20% is the acceleration efficiency. so, (20% = 16.6ms-2). You are asked to calculate the average power input (total power input). So, find the 100% efficiency. 20%=16.6, 1%= 16.6/0.20 = 0.8358ms-2. So, 100% efficiency for the acceleration would be, 100% = 0.83.. times 100 = 83ms-2. The tension is the cable is 9.61x10^4N. so, P=fv can be used to calculate the output power. (v is not given), so use p=f times s/t. This gives, p = (9.61x10^4 x 101)/3.5 = 2.8Mw. Now, since this is only 20% of the total power input, You will have to find 100% because input power means total input power to the machine. So, the final answer would be(lets call 100% power to be x), 2.8/x = 100%. Rearrange, you will find x to be 14Mw. So, 100% input is 14Mw. Does that helps?
    Don't still get how you get 14Mw from that, because you said 2.8/x= 100%, if you rearrange it you get a completely different answer???


    Posted from TSR Mobile
    Offline

    5
    ReputationRep:
    (Original post by Jimmy20002012)
    Don't still get how you get 14Mw from that, because you said 2.8/x= 100%, if you rearrange it you get a completely different answer???


    Posted from TSR Mobile
    Ok, 2.8/x=100%. (Convert 100% into decimal which is just 1). x=2.8/1 = 14/5. So, top heavy number is the answer since the denominator is the 5(100%).
    Offline

    5
    ReputationRep:
    (Original post by Jimmy20002012)
    Don't still get how you get 14Mw from that, because you said 2.8/x= 100%, if you rearrange it you get a completely different answer???


    Posted from TSR Mobile
    Check this out! http://www.wolframalpha.com/input/?i...D100%25+find+x
    Offline

    2
    ReputationRep:
    Got it, thanks


    Posted from TSR Mobile
    Offline

    5
    ReputationRep:
    (Original post by Jimmy20002012)
    Got it, thanks


    Posted from TSR Mobile
    No Problem!
    Offline

    2
    ReputationRep:
    (Original post by StalkeR47)
    No Problem!
    Is there actually anything you don't know for this exam?


    Posted from TSR Mobile
    Offline

    12
    ReputationRep:
    (Original post by eilish1903)
    This graph ??

    Posted from TSR Mobile
    (Original post by Currentlysmilin)
    The middle peak refers the to the zero order beam which is the brightest and twice as big as the rest of the peaks, this is because it is the same as the incident beam of light therefore all of the incident light is displayed on the screen. The rest of the peaks are less intense as it had been diffracted more, but they all will have the same width but their peaks would decrease the further away from the zero order beam the less bright they will be.
    So the central red graph represents the diffraction grating?

    If so, what does the large blue curve and dotted red curve represent? Young's double slit? Really confused as to what each one is.
 
 
 
Poll
Do you agree with the PM's proposal to cut tuition fees for some courses?

The Student Room, Get Revising and Marked by Teachers are trading names of The Student Room Group Ltd.

Register Number: 04666380 (England and Wales), VAT No. 806 8067 22 Registered Office: International House, Queens Road, Brighton, BN1 3XE

Write a reply...
Reply
Hide
Reputation gems: You get these gems as you gain rep from other members for making good contributions and giving helpful advice.