Hey there! Sign in to join this conversationNew here? Join for free

2016 Official AQA New Spec AS Level Physics Paper 2 - 9th June 2016 Watch

    Offline

    4
    ReputationRep:
    (Original post by RKM21)
    I just made my own notes on them.
    can you share it?
    Offline

    3
    ReputationRep:
    (Original post by dragonblazer11)
    can you share it?
    The're on scrap pieces of paper and on really scruffy writing. It wont take long, just make your own using your notes from lessons.
    Offline

    0
    ReputationRep:
    (Original post by jessyjellytot14)
    Do we even need to know about the required practicals we've done? None of the specimen papers even mention them. Well, only briefly, but i'm beginning to question whether its actually worth writing out detailed notes for each practical?
    The specification says that there will be 20 marks on the required practicals, 30 multiple choice marks and 20 marks of normal questions.
    Offline

    14
    ReputationRep:
    I thought that the new spec of science is linear. Meaning you do all three exams in your third year.What are these exams for?Are they simply exams which you do in order to get predicted grades which don't count towards your actual grade or what?
    Offline

    2
    ReputationRep:
    Can someone explain uncertanties to me? For example if I have a reading from a ruler as 45.3 cm how will I know the uncertainty?

    is it just the smalles possible value I can measure with the ruler?

    so in this case it is +-0.01 mm??
    Offline

    1
    ReputationRep:
    (Original post by Kraixo)
    Can someone explain uncertanties to me? For example if I have a reading from a ruler as 45.3 cm how will I know the uncertainty?

    is it just the smalles possible value I can measure with the ruler?

    so in this case it is +-0.01 mm??
    Yeah but I don't think you can measure 0.01mm on a ruler, so in your example the error would be +- 1mm. Also make sure your measurement and error are the same units. Hope that helps
    Offline

    1
    ReputationRep:
    Yep that's it. just be sure to have the measurement and it's error use the same units. And also I don't think you can measure a hundredth of a mm on a ruler. In your example, the error would be +- 1mm
    Offline

    1
    ReputationRep:
    I seriosuly have NO IDEA what I should be doing to revise for this, I've already gone through the 2016 specimen paper to death (http://physicsloreto.weebly.com/uplo..._2_qp_v1.1.pdf), do I just make notes on each core practical? Do I just hammer any practice questions I can find?

    Really wish they'd quit changing everything, really makes it hard to feel prepared for exams..
    Offline

    1
    ReputationRep:
    Yeah, right now I'm making notes on all 6 practicals. On the bright side, this could mean the grade boundaries are lower than usual!
    Offline

    2
    ReputationRep:
    Attachment 544417544419Name:  del.png
Views: 753
Size:  21.6 KB

    Hi can someone explain how to answer those 2 questions thanks.
    Attached Images
     
    Offline

    7
    ReputationRep:
    I was doing the 2nd specimen paper 2 the other day and noticed there weren't any 6 markers - are there definitely going to be no 6 markers on paper 2 or was that just a mistake on that specimen paper?
    Offline

    0
    ReputationRep:
    i feel like the specimen paper practical questions were just about measurements and vaguely related to the practicals we have done. I think the required practicals were only shown to us to help us make sense of the questions in the paper. I am just gonna look through my notes to remind me what they were and then hopefully i wont get as lost in the question!
    Offline

    9
    ReputationRep:
    Do you read the micrometer the same way as vernier calliper is there a difference. I know how to measure stuff with the vernier calliper, but I never got to use the micrometer when we did the practicals
    Offline

    0
    ReputationRep:
    does this exam have alot of multiple choice questions on it?
    Offline

    1
    ReputationRep:
    (Original post by kyle1w)
    does this exam have alot of multiple choice questions on it?
    Yes, 30 marks worth
    Offline

    1
    ReputationRep:
    (Original post by Kraixo)
    Attachment 544417544419Name:  del.png
Views: 753
Size:  21.6 KB

    Hi can someone explain how to answer those 2 questions thanks.
    answer is B to q31 but not sure how,

    However, the answer to q33 is A. This is because they are both at the same stage in the circuit. meaning if the current split and goes through each route the it goes through 2 resistors before getting to point Q or U respectivelty. Therefore, resistance had effected both routes equally therefore, there is no Difference in potential. (pd at Q = pd at U) Therefore Q-U=0
    Offline

    1
    ReputationRep:
    (Original post by dragonblazer11)
    can you share it?
    Don't just make notes, because with this new spec you can know all the knowledge and still do **** as many of us found in paper 1. Do more past papers and then things you don't know read about, then try a question you find hard. In my opinion you can know all the knowledge and scrape a C/D if you can't apply it
    Offline

    0
    ReputationRep:
    Is breaking stress and ultimate tensile stength (UTS) the same thing? Different sources say differently.
    Offline

    16
    ReputationRep:
    (Original post by chris51333)
    Is breaking stress and ultimate tensile stength (UTS) the same thing? Different sources say differently.
    No. The Ultimate Tensile stress is not necessarily the breaking stress. Instead "necking" occurs hence the material experiences strain without any added stress. As you can see:
    The
    Offline

    0
    ReputationRep:
    (Original post by Someboady)
    No. The Ultimate Tensile stress is not necessarily the breaking stress. Instead "necking" occurs hence the material experiences strain without any added stress. As you can see:
    The
    so breaking stress if when the material fractures? Because in the AQA textbook it's written that the UTS is sometimes referred to as the breaking stress, but other books disagree.
 
 
 
  • See more of what you like on The Student Room

    You can personalise what you see on TSR. Tell us a little about yourself to get started.

  • Poll
    What's your favourite Christmas sweets?
  • See more of what you like on The Student Room

    You can personalise what you see on TSR. Tell us a little about yourself to get started.

  • The Student Room, Get Revising and Marked by Teachers are trading names of The Student Room Group Ltd.

    Register Number: 04666380 (England and Wales), VAT No. 806 8067 22 Registered Office: International House, Queens Road, Brighton, BN1 3XE

    Quick reply
    Reputation gems: You get these gems as you gain rep from other members for making good contributions and giving helpful advice.