# June 2011 G485-Fields, Particles and Frontiers of PhysicsWatch

7 years ago
#941
(Original post by ziigmund)
was the voltage 1.5v or 2v? idk if it was a ratio of 1:3 ie 1/4 or 1/3
I got 1.5v on 4.5capacitor and 4.5V on the 1.5capacitor.
2
7 years ago
#942
I think 4.5v for 1.5X10^-6 capacitor becus C1XV1=C2XV2 in series. it is not the ratio like resistance in AS G482 and 1.5 for 4.5X10^-6 capacitor
so that they have the same charge overal for both capacitors
0
7 years ago
#943
Pretty sure I got 3 for the ratio which is right, there's a high p.d. across the smaller capacitor.

For the eletric field question, you had to use the left hand rule, using the current as conventional current, so you had the force pointing upwards, and the force on the scale would be whatever it was plus 0.016 i think, due to newton's 3rd law of motion pushing down on the magnet..
0
7 years ago
#944
Gah I got the P.D's across the capacitors wrong. I hope they won't punish me too many times for that cause you needed to use it in the other questions!
0
7 years ago
#945
(Original post by Franklin)
Pretty sure I got 3 for the ratio which is right, there's a high p.d. across the smaller capacitor.

For the eletric field question, you had to use the left hand rule, using the current as conventional current, so you had the force pointing upwards, and the force on the scale would be whatever it was plus 0.016 i think, due to newton's 3rd law of motion pushing down on the magnet..
That's EXACTLY what I put. Thank **** there is some hope for this question.
1
7 years ago
#946
For the current/ power dissapated question.. did anyone use 0.2V for the p.d - as it said across the wire, not across the lamp?
0
7 years ago
#947
(Original post by JohnnySAFC19)
Did any1 else not finish the paper or was that just me
i totally didn't finish, thought i had more time than i did and didnt do the last 2 questions :/
does anyone know how many marks the last few questions were?
0
7 years ago
#948
What did people get for the angle using the vector diagram? Not a bad paper overall, just difficult. I didnt even notice this mistake, which is quite worrying!
0
7 years ago
#949
How did people get the angle for the ball question as 18? I got 73 using the tan of the angle and the horizontal/vertical components.

Overall, a tricky paper. Took a while to figure out some of the answers, but I think I did okay.
1
7 years ago
#950
(Original post by JohnnySAFC19)
Did any1 else not finish the paper or was that just me
i had to rush at the end and didnt have time to go back and check my answers - she stopped me writing mid sentance, and wouldnt let me write one more word so that what i wrote made sence , but in answer to your question i did finish the paper -just lol
0
7 years ago
#951
(Original post by Captain Hob)
How did people get the angle for the ball question as 18? I got 73 using the tan of the angle and the horizontal/vertical components.

Overall, a tricky paper. Took a while to figure out some of the answers, but I think I did okay.
You might not of done MG to get the mass of the ball as a force.
0
7 years ago
#952
(Original post by Captain Hob)
How did people get the angle for the ball question as 18? I got 73 using the tan of the angle and the horizontal/vertical components.

Overall, a tricky paper. Took a while to figure out some of the answers, but I think I did okay.
I got 73 as well but that's wrong since you had to use the weight of the charge and not the mass, so x 9.81. I hope we at least get some method marks.
0
7 years ago
#953
I got 18.4 degress for the angle. Resolved vertically and horizontally, then divided through to get rid of tension.
0
7 years ago
#954
(Original post by ViralRiver)
For the current/ power dissapated question.. did anyone use 0.2V for the p.d - as it said across the wire, not across the lamp?
I used 0.2V too
0
7 years ago
#955
(Original post by Lucy24)
i totally didn't finish, thought i had more time than i did and didnt do the last 2 questions :/
does anyone know how many marks the last few questions were?
Q9: Ultrasound worth 5 marks
Q10: Nuclear fission worth 7 marks.

=12%
0
7 years ago
#956
(Original post by Captain Hob)
How did people get the angle for the ball question as 18? I got 73 using the tan of the angle and the horizontal/vertical components.

Overall, a tricky paper. Took a while to figure out some of the answers, but I think I did okay.
i got 87 lol, and yh same i recon i did okay, but there wasnt anyhthing on decay reactions - i could have done that lol
0
7 years ago
#957
(Original post by dasha962)
medical physics is a waste of time, there is sooo much to learn for it.
I KNOW RIGHT!! it's so useless...not interesting...hard..hard to understand ...so much...depressing...words with calculations that would never actually help me in my life. it's so pointless...why did they add it to the syllabus? i rather if we do more nuclear/fields/cosmology bit=,=

but the exam on it was quite gd...not too hard
0
7 years ago
#958
(Original post by VDX)
I used 0.2V too
I totally didnt, FUUUUUUUU
0
7 years ago
#959
(Original post by Lucy24)
i totally didn't finish, thought i had more time than i did and didnt do the last 2 questions :/
does anyone know how many marks the last few questions were?
0
7 years ago
#960
(Original post by Raimu)
That's EXACTLY what I put. Thank **** there is some hope for this question.
Using the left had rule force would be downwards and therefore the magnet would be pushed upwards therefore you would take it away from the balance
1
X

new posts
Latest
My Feed

### Oops, nobody has postedin the last few hours.

Why not re-start the conversation?

see more

### See more of what you like onThe Student Room

You can personalise what you see on TSR. Tell us a little about yourself to get started.

### University open days

• Cranfield University
Cranfield Forensic MSc Programme Open Day Postgraduate
Thu, 25 Apr '19
• University of the Arts London
Open day: MA Footwear and MA Fashion Artefact Postgraduate
Thu, 25 Apr '19
• Cardiff Metropolitan University
Sat, 27 Apr '19

### Poll

Join the discussion

#### Have you registered to vote?

Yes! (278)
37.98%
No - but I will (53)
7.24%
No - I don't want to (53)
7.24%
No - I can't vote (<18, not in UK, etc) (348)
47.54%

View All
Latest
My Feed

### Oops, nobody has postedin the last few hours.

Why not re-start the conversation?

### See more of what you like onThe Student Room

You can personalise what you see on TSR. Tell us a little about yourself to get started.