Turn on thread page Beta
    • Thread Starter
    Offline

    3
    ReputationRep:
    (Original post by rhungwilym)
    No way I got 58
    How do you know??
    Offline

    8
    ReputationRep:
    (Original post by gergjre)
    I put 0.4Fsin(40)=0.9(22)+1.8(12)

    therefore, F=(41.4)/0.4sin(40)
    F=77.12N

    Is that wrong? Thought I resolved the vector correctly?!?!?!?!?!?!
    for the force of the hinge? hmmm i can't remember my answer but you had to use the principle that forces in the up direction equalled the forces in the down direction
    Offline

    0
    ReputationRep:
    (Original post by gergjre)
    I put 0.4Fsin(40)=0.9(22)+1.8(12)

    therefore, F=(41.4)/0.4sin(40)
    F=77.12N

    Is that wrong? Thought I resolved the vector correctly?!?!?!?!?!?!
    I think it was that for the right side of the paper. I thought it was just normal moment equation on the left side then do FCosAngle or FSinAngle. dunno though
    Offline

    0
    ReputationRep:
    (Original post by matthewdjones)
    for the force of the hinge? hmmm i can't remember my answer but you had to use the principle that forces in the up direction equalled the forces in the down direction
    Ahhhhhhh im so nervous for PH2 now that this is by far the hardest PH1 paper there has been and i need an A!!!!!!!!!!!
    • Thread Starter
    Offline

    3
    ReputationRep:
    (Original post by gergjre)
    I put 0.4Fsin(40)=0.9(22)+1.8(12)

    therefore, F=(41.4)/0.4sin(40)
    F=77.12N

    Is that wrong? Thought I resolved the vector correctly?!?!?!?!?!?!
    Wait, the force labelled F should've been 200N (approx.).
    Offline

    6
    ReputationRep:
    So no marks for EMF, but 8 for recalling a practical... For the practical 5 marker I said start at boiling point and work down for 'more precise readings', stir for uniform temp, check ohm meter for zero error etc, only with about 5 minutes left I realised it was from 0 to 100 degrees so just stuck in 'add ice cubes' at the very end, what a stupid question that was -.-
    Offline

    0
    ReputationRep:
    (Original post by PrimeLime)
    Wait, the force labelled F should've been 200N (approx.).
    Ohh yeah hahahah! I had like 196N if i remember correctly. I think hmmmmm
    • Thread Starter
    Offline

    3
    ReputationRep:
    (Original post by gergjre)
    Ahhhhhhh im so nervous for PH2 now that this is by far the hardest PH1 paper there has been and i need an A!!!!!!!!!!!
    And PH2 is only gonna be 10x harder...
    Offline

    6
    ReputationRep:
    (Original post by PrimeLime)
    Wait, the force labelled F should've been 200N (approx.).
    Yeah I got something like 196.02N? They're always a bit unprecise with those types of questions...
    • Thread Starter
    Offline

    3
    ReputationRep:
    (Original post by gergjre)
    Ohh yeah hahahah! I had like 196N if i remember correctly. I think hmmmmm
    Yes! I got that. Did you get the hinge pulling down with 94N or something?
    Offline

    0
    ReputationRep:
    I thought the Zip Line question was really stupid as well. With the diagram, I said measure the resistance every 10 celsius but forgot every 30s and also forgot to say cool down with water and I put the wrong word for the graph. I put curved instead of linear.
    • Thread Starter
    Offline

    3
    ReputationRep:
    (Original post by Jonooo123)
    Yeah I got something like 196.02N? They're always a bit unprecise with those types of questions...
    I know, it's hardly acceptable to round to 200 there XD. I got 164 the first time I did it and I was like, knowing WJEC this counts as 'approximately 200N' LOL. But then I came to my senses and redid that part.
    Offline

    0
    ReputationRep:
    (Original post by PrimeLime)
    And PH2 is only gonna be 10x harder...
    I know. I liked all the PH1 past papers but that today was disgusting. Ohh well got 2 weeks to prepare for PH2!! Just got to cover every angle
    Offline

    0
    ReputationRep:
    (Original post by PrimeLime)
    Yes! I got that. Did you get the hinge pulling down with 94N or something?
    I got 94. but the hinge was pushing up. well that's what I thought
    • Thread Starter
    Offline

    3
    ReputationRep:
    (Original post by rhungwilym)
    I thought the Zip Line question was really stupid as well. With the diagram, I said measure the resistance every 10 celsius but forgot every 30s and also forgot to say cool down with water and I put the wrong word for the graph. I put curved instead of linear.
    Oh come on! I forgot to mention what the graph would look like, because they asked how would the results be analysed! Surely you didn't need to mention that it would be a straight line through O right?? :crossedf:
    What didn't you get about the zip line question?
    Offline

    0
    ReputationRep:
    (Original post by PrimeLime)
    Oh come on! I forgot to mention what the graph would look like, because they asked how would the results be analysed! Surely you didn't need to mention that it would be a straight line through O right?? :crossedf:
    What didn't you get about the zip line question?
    Everything..
    • Thread Starter
    Offline

    3
    ReputationRep:
    (Original post by gergjre)
    I know. I liked all the PH1 past papers but that today was disgusting. Ohh well got 2 weeks to prepare for PH2!! Just got to cover every angle
    Exactly the same with me. I loved PH1 (favourite exam) and was really looking forward to this paper. I was let down. A lot.
    And um... I'm still yet to complete a PH2 paper... or revise my notes... or learn half the content...
    • Thread Starter
    Offline

    3
    ReputationRep:
    (Original post by rhungwilym)
    Everything..
    Did you at least find mg(delta)h and 1/2mv^2 and maybe find the difference?
    Offline

    0
    ReputationRep:
    (Original post by PrimeLime)
    Yes! I got that. Did you get the hinge pulling down with 94N or something?
    I cant remember. I probably screwed it up. Circuit question and q7 were the worst though!
    Offline

    0
    ReputationRep:
    (Original post by PrimeLime)
    Exactly the same with me. I loved PH1 (favourite exam) and was really looking forward to this paper. I was let down. A lot.
    And um... I'm still yet to complete a PH2 paper... or revise my notes... or learn half the content...
    Neither have I. I havent looked at anything for about 4 weeks. OOPS
 
 
 

3,461

students online now

800,000+

Exam discussions

Find your exam discussion here

Poll
Should universities take a stronger line on drugs?

The Student Room, Get Revising and Marked by Teachers are trading names of The Student Room Group Ltd.

Register Number: 04666380 (England and Wales), VAT No. 806 8067 22 Registered Office: International House, Queens Road, Brighton, BN1 3XE

Write a reply...
Reply
Hide
Reputation gems: You get these gems as you gain rep from other members for making good contributions and giving helpful advice.