Could someone check to see if I have worked this out correctly

The current (𝑖𝐿) through a 250 mH inductor (L) has a relationship with time (t) as follows:

𝑖𝐿 = 1/L ∫ sin(100t) dt

Determine the inductor current when the time is 1.5 seconds.

iL= 1/0.25 cos(100*1.5)

= 2.797A

Thanks

The current (𝑖𝐿) through a 250 mH inductor (L) has a relationship with time (t) as follows:

𝑖𝐿 = 1/L ∫ sin(100t) dt

Determine the inductor current when the time is 1.5 seconds.

iL= 1/0.25 cos(100*1.5)

= 2.797A

Thanks

Original post by thomas0611

Could someone check to see if I have worked this out correctly

The current (𝑖𝐿) through a 250 mH inductor (L) has a relationship with time (t) as follows:

𝑖𝐿 = 1/L ∫ sin(100t) dt

Determine the inductor current when the time is 1.5 seconds.

iL= 1/0.25 cos(100*1.5)

= 2.797A

Thanks

The current (𝑖𝐿) through a 250 mH inductor (L) has a relationship with time (t) as follows:

𝑖𝐿 = 1/L ∫ sin(100t) dt

Determine the inductor current when the time is 1.5 seconds.

iL= 1/0.25 cos(100*1.5)

= 2.797A

Thanks

When you integrate sin, you need to get the sign correct and account for the 100 multiplier (frequency).

Original post by mqb2766

When you integrate sin, you need to get the sign correct and account for the 100 multiplier (frequency).

So it should be -cos?

(1/25010^-3) * (-cos150/100) = -0.0279A

Does that look correct?

Original post by thomas0611

So it should be -cos?

(1/25010^-3) * (-cos150/100) = -0.0279A

Does that look correct?

(1/25010^-3) * (-cos150/100) = -0.0279A

Does that look correct?

Integral of sin is -cos, however not sure what youve done with the 100 and 10^(-3). If you have

sin(wt)

what is its integral? You can validate by differentiating what you end up with using the chain rule. Obv w=100 for your example.

(edited 7 months ago)

Original post by mqb2766

Integral of sin is -cos, however not sure what youve done with the 100 and 10^(-3). If you have

sin(wt)

what is its integral? You can validate by differentiating what you end up with using the chain rule. Obv w=100 for your example.

sin(wt)

what is its integral? You can validate by differentiating what you end up with using the chain rule. Obv w=100 for your example.

So it should be -1/2cos(wt) Is that the correct integral

Original post by thomas0611

So it should be -1/2cos(wt) Is that the correct integral

If you differentiate that using the chain rule, what do you get? No idea where the 1/2 comes from.

Original post by mqb2766

If you differentiate that using the chain rule, what do you get? No idea where the 1/2 comes from.

Sorry should be -1/wcos(wt)

=-1/100cos(150)

I'm unsure on the exact step to differentiate this. Would I do the brackets first?

Original post by thomas0611

Sorry should be -1/wcos(wt)

=-1/100cos(150)

I'm unsure on the exact step to differentiate this. Would I do the brackets first?

=-1/100cos(150)

I'm unsure on the exact step to differentiate this. Would I do the brackets first?

I think this is correct now:

1/0.25-(1/100)cos(100t) = 0.03464A

(edited 7 months ago)

Original post by thomas0611

Sorry should be -1/wcos(wt)

=-1/100cos(150)

I'm unsure on the exact step to differentiate this. Would I do the brackets first?

=-1/100cos(150)

I'm unsure on the exact step to differentiate this. Would I do the brackets first?

-1/wcos(wt) is correct as the integral for sin(wt), but you should be able to verify this using the chain rule as its

dy/du du/dt

where here u=wt so dy/du = sin(wt) and du/dt = w so you get back to where you started. So just use that in the original expression with the 1/L multiplier and you should be good. Im getting a different value compared to #7, so show each part if necessary.

(edited 7 months ago)

Original post by mqb2766

-1/wcos(wt) is correct as the integral for sin(wt), but you should be able to verify this using the chain rule as its

dy/du du/dt

where here u=wt so dy/du = sin(wt) and du/dt = w so you get back to where you started. So just use that in the original expression with the 1/L multiplier and you should be good. Im getting a different value compared to #7, so show each part if necessary.

dy/du du/dt

where here u=wt so dy/du = sin(wt) and du/dt = w so you get back to where you started. So just use that in the original expression with the 1/L multiplier and you should be good. Im getting a different value compared to #7, so show each part if necessary.

1/l -1/100cos(100t)+c

c=0

-4*1/100cos(100*1.5)

-4/100cos(150)

=0.0346A

That is my working. Should the calculator be set in radians?

This would give answer as -o.02797A

Original post by thomas0611

1/l -1/100cos(100t)+c

c=0

-4*1/100cos(100*1.5)

-4/100cos(150)

=0.0346A

That is my working. Should the calculator be set in radians?

This would give answer as -o.02797A

c=0

-4*1/100cos(100*1.5)

-4/100cos(150)

=0.0346A

That is my working. Should the calculator be set in radians?

This would give answer as -o.02797A

Yes for radians. When you differentiate or integrate trig functions like that youre assuming theyre in radians. Agree with the value.

Original post by mqb2766

Yes for radians. When you differentiate or integrate trig functions like that youre assuming theyre in radians. Agree with the value.

Thanks for your help!

Original post by mqb2766

Yes for radians. When you differentiate or integrate trig functions like that youre assuming theyre in radians. Agree with the value.

I have similar calculations but am struggling with 0.04cos. where does this come from?

Original post by thomas0611

So it should be -cos?

(1/25010^-3) * (-cos150/100) = -0.0279A

Does that look correct?

(1/25010^-3) * (-cos150/100) = -0.0279A

Does that look correct?

Agreed. the (-) sign indicates a lagging current w.r.t. Voltage although not mentioned

Original post by JTRLC

I have similar calculations but am struggling with 0.04cos. where does this come from?

My understanding is that sin(100t)dt integrated becomes -1/100cos(100t) + C

So you have 1/L * 1/100 = 1/0.25 * 1/100 = -0.04 which then you can sub back in

I have the same answer as the poster above (27.97mA) but what I don't understand in why we can just disregard the constant C. Why are we to assume C=0 or just remove from our workings? Is it because is a definitive integral as we have t=1.5?

Could anyone help?

Sorry for double post but just in case anyone comes back to this post in future. I submitted my assignment based on the answer with my calculator in radians mode but I had feedback from my tutor that this was incorrect. I've gotten away with it as my methodology is correct I still got the mark I was looking for, but the final answer was wrong due to calculator mode. One to watch.

Original post by AdamMc90

Sorry for double post but just in case anyone comes back to this post in future. I submitted my assignment based on the answer with my calculator in radians mode but I had feedback from my tutor that this was incorrect. I've gotten away with it as my methodology is correct I still got the mark I was looking for, but the final answer was wrong due to calculator mode. One to watch.

Hi AdamMc90,

Did your tutor say what the answer should have been or what the mode of the calculator should have been, i was under the impression that it also should have been in radians mode and have also got the same answer as above.

Thanks.

- RLC circuit
- HNC electrical engineering
- inductor current (HNC maths)
- Physics Alevel question :- electromagnetism induction and alternating current
- HNC, MATHS, draw a vector diagram
- slight mag fields confusion
- As temperature increases, what the hell happens to current and resistance??
- Cambridge MASt (Part III) applicants 2023
- Series and parallel circuit's
- help! two quick Dc electricity questions
- UCAS application for transferring uni
- Physics magnetic fields question
- Re-application help
- St Andrews 2024/25 Postgraduate Applicants
- Britsh physics olympiad 2022 (y13)
- Lenz law
- Capacitors
- Circuits Question
- A level physics electricity question(1)
- SFE, how do i know they have received my application/evidence?

Latest

Trending